What additional routing configuration should be performed to prevent routing loops and suboptimal

Company A recently acquired Company B and the network infrastructures are being merged. Bothorganizations used non-overlapping globally unique network addressing but different Interior GatewayProtocols (IGPs). Initially, multiple WAN links will connect the two organizations. Company A will maintainits core routing protocol, and Company B’s routing protocol will be the edge routing protocol. Two-wayredistribution will be […]

Read More

What else must you configure to ensure a successful setup?

You are configuring a DHCP server to service a group of clients that are located on a different subnet than the DHCP server itself. What else must you configure to ensure a successful setup? A. Relay agent B. Multicast routing C. Unicast routing D. Access list Explanation: If a DHCP server needs to service clients […]

Read More

Which strategy does Cisco recommend in this situation?

You have two autonomous systems connected by more than one ASBR. Which strategy does Cisco recommend in this situation? A. Use two-way redistribution. B. Use a default route in both directions. C. Allow routes to be exchanged in one direction, and use a default route in the other direction. D. Manually configure routes in all […]

Read More

What should be the value for the missing ASN?

Refer to the following table: Path1, Path2, and Path3 are the available routes between routers A and B. The bgp always-compare med command is executed for all three routes. What should be the value for the missing ASN (represented by a question mark in the table) so that Path3 becomes the best path between routers A and […]

Read More

Which of the following neighbors have an established connection with RouterA?

Consider the following output of the show ip bgp summary command: Which of the following neighbors have an established connection with RouterA? A. 10.1.1.1 B. 10.2.1.1 C. 10.3.1.1 D. 10.4.1.1 E. 10.5.1.1 Explanation: The neighbor with the IP address 10.2.1.1 has an established connection with RouterA. This is because the State/PfxRcd value for this neighbor […]

Read More