Prev Question

An engineer needs to configure server 1 to communicate on tagged VLANs 10, 20, and 30 and untagged
VLAN 50. The server is in SLOT 1 of an FX2s chassis with two FN410s IOAs. The switches are currently
set to default settings.
Which command should be entered in each IOA to perform the engineer’s task?

A. interface range vlan 10, vlan 20, vlan 30, vlan 50
no shut
interface TenGigabitEthernet 0/1
portmode hybrid
switchport
vlan tagged 10,20,30
vlan untagged 50

B. interface range vlan 10, vlan 20, vlan 30, vlan 50
no shut
interface TenGigabitEthernet 0/1
switchport
vlan tagged 10,20,30
default vlan 50

C. interface range vlan 10, vlan 20, vlan 30, vlan 50
no shut
interface TenGigabitEthernet 0/1
switchport
vlan tagged 10,20,30
default vlan-id 50

D. interface range vlan 10, vlan 20, vlan 30, vlan 50
no shut
interface TenGigabitEthernet 0/1
portmode hybrid
switchport
vlan tagged 10,20,30

Explanation:

Prev Question

Leave a Reply

Your email address will not be published. Required fields are marked *